by John Crump AmmoLand
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) and the Justice Department (DOJ) are asking the 3D printing industry to block the printing of gun parts.
Earlier this month, the government held an event hosted by ATF Director Steve Dettelbach and U.S. Deputy Attorney General Lisa Monaco. The government invited federal law enforcement, members of the 3D-printing industry, and academia to the conference in Washington, DC. The goal was to pressure the industry to stem the tide of 3D-printed gun.
ATF And DOJ Ask 3D Printing Industry To Block Homemade Gun Parts
ATF And DOJ Ask 3D Printing Industry To Block Homemade Gun Parts
by John Crump AmmoLand
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) and the Justice Department (DOJ) are asking the 3D printing industry to block the printing of gun parts.
Earlier this month, the government held an event hosted by ATF Director Steve Dettelbach and U.S. Deputy Attorney General Lisa Monaco. The government invited federal law enforcement, members of the 3D-printing industry, and academia to the conference in Washington, DC. The goal was to pressure the industry to stem the tide of 3D-printed gun.
Harris Makes False Claim About ‘Gun Dealers’ And Background Checks
Kimberly Guilfoyle Criticizes Kamala Harris For Alleged Mistreatment Of Women
Elected Official And Family Murdered, Shocking Small Vermont Town
CNN Admits It Doesn’t ‘Feel Like’ Crime Is Down Despite FBI Report
by John Crump AmmoLand
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) and the Justice Department (DOJ) are asking the 3D printing industry to block the printing of gun parts.
Earlier this month, the government held an event hosted by ATF Director Steve Dettelbach and U.S. Deputy Attorney General Lisa Monaco. The government invited federal law enforcement, members of the 3D-printing industry, and academia to the conference in Washington, DC. The goal was to pressure the industry to stem the tide of 3D-printed gun parts.
The ATF and DOJ discussed people using 3D printers to make machinegun conversion devices (MCDs) such as “Yankee Boogles.” A “Yankee Boogle” is a device made on 3D printers that allows a user to convert a semi-automatic AR-15 to a fully automatic firearm. It can be made on any 3D printer with under a dollar of PLA filament. The ATF claims it takes them 37 minutes to produce each Yankee Boogle.
The ATF acknowledged running a print farm in Martinsburg, West Virginia, at its Firearms and Ammunition Technology Division (FATD). A print farm is a place where multiple 3D printers are used to produce numerous items at once. The ATF print farm consists of 12 Creality Ender 3 printers. These printers run between $200 and $300. They can often be found on sale at Micro Center for $100. The ATF claims that its printers cost $2500 but didn’t clarify if they paid that for each one or the entire print farm.
Neither the ATF nor the DOJ said precisely how the 3D print industry could prevent the printing of gun parts. It will be hard to impossible for the industry to prevent the printing of firearms parts, whether they are frames, silencers, or MCDs. One method would be adding blocking programming into the slicer software. A slicer converts a 3D file (STL) into a printable file that holds all settings (3mf).
That might work with some slicing software, but it wouldn’t work with all slicer software. No one is tied into a particular slicer. Many slicers are open source, meaning even if every slicer added the ability to block gun parts, which is highly unlikely, a fork for the slicers without the added prevention code could be made relatively quickly.
Another possibility is for companies that use cloud printing, such as Bambu Labs, to add a feature where the file is scanned when uploaded to the cloud, but most 3D printers do not use cloud printing, which means this solution wouldn’t work for many printers on the market. Also, even the Bambu printers can print directly from a micro-SD card. This method would slow down the printing of gun parts.
Another way that might be possible is to bake in some type of blocking capabilities to a printer’s firmware that would either insert random garbage into a file to poison it or totally prevent the printing of a 3D model. It is a giant leap to give the firmware the capability to identify every gun part, but if the concern is just MCDs, it might be possible to add it to off-the-shelf printers. Even that has limitations, though. Custom firmware exists for almost every printer on the market, meaning that if someone wanted to print a gun part, they would simply have to change the firmware, which is relatively straightforward.
The final option would be to use some type of AI to tell whether a part is a gun part. This task would be a heavy lift, and most printers, including the ones at the ATF, wouldn’t be capable of doing it without added hardware. Maybe combining all the techniques would cut down on gun parts produced by 3D printing, but there are always homemade 3D printers to get around any type of blocking.
The ATF and DOJ might have asked for help from the industry and academia because they had no good answers to its perceived problem. The government is trying to put the genie back into the bottle, but that might not be possible. Chances are the industry and academia probably don’t have a solution either.
The Gun-CAD world is resilient and decentralized. It might be too late for the government to stop the signal. The 3D printing world has made gun control obsolete.
Find the original article in its entirety on AmmoLand.
READ NEXT: Kamala’s Viral Controversy: Awful Remarks On Gun Dealers And Background Checks Emerge
Sponsored
With early voting now underway, we have to know: Are YOU still with us? Please submit your responses below before the Early Voting Cutoff to complete the 2024 Voter Verification Questionnaire!Ammoland
Elected Official And Family Murdered, Shocking Small Vermont Town
Search
follow us
subscribe
Trending Stories
Congress Must Save National Guard From Federal Control
PAUL’S DAILY BRIEF (PDB) Monday – The National GuardElon Musk’s ‘Military Cybertrucks’ Are In Russian Hands
ANALYSIS – An impressive new aftermarket project isHow Israeli ‘Pager Attacks’ Wreaked Havoc On A Notorious Terrorist Group
ANALYSIS – And it couldn’t have happened toSecond Attempt On Trump’s Life, Dem Rhetoric And Civil Conflict
ANALYSIS – Are we headed for another civilCommentary
ATF And DOJ Ask 3D Printing Industry To Block Homemade Gun Parts
Congress Must Save National Guard From Federal Control
Federal Court Refuses To Dismiss 2A Civil Rights Case Against Police Officers
Elon Musk’s ‘Military Cybertrucks’ Are In Russian Hands
Security
US To Deploy Additional Troops To Middle East Amid Rising Tensions
Ex-Border Patrol Chief Drops Bombshell – Biden-Harris Ordered Cover-Up On Terrorist Arrests And Fentanyl Crisis?
Army Training Materials Labeled Conservative Groups ‘Terrorists’
Chinese Spies Lurked In American Engineering Firm’s Servers For Months Undetected
Foreign Affairs
Britain’s Left-Wing Labour Party Limiting Bar Hours To Curb Alcohol Related Doctors’ Visits
Tlaib Condemns Targeted Attacks On Hezbollah, Stays Silent On Israeli Civilian Casualties
Venezuelan Media Turns To AI To Shield Journalists From Persecution
Israel And Hezbollah Exchange Fire Over Lebanese Border Following Deadly Explosions
Business & economics
Trump Threatens John Deere With 200% Tariff If It Moves Operations To Mexico
Federal Reserve Cuts Interest Rates By 50 Basis Points
Trump Pledges To Eliminate Taxes On Overtime Work If Reelected
Truth Social Stock Plummets, Then Rebounds After Trump-Kamala Debate
heath & science
Brett Favre Announces Parkinson’s Disease Diagnosis
Trump Rallygoers In Arizona Report Mysterious Eye Injuries After Event
Why Isn’t The Media Celebrating This Remarkable American Triumph?
New York Governor Reveals Cancer Diagnosis
American Liberty Arms
Massachusetts Supreme Court Moves Forward With Cross Border Carry Case
Former Oakland Police Chief Who Bashed Armed Citizens Now Running For City Council
Defensive Shooting At Funeral Home Leads To Quick Arrangements, No Arraignment
Judge Rules Memphis Anti-Gun Questions Can Appear On November Ballot
At American Liberty News, we eschew the mainstream media’s tightly controlled narrative to provide our readers with real news, real insights, and the means to take action. We seek out insightful coverage – and partner with knowledgeable and experienced people and organizations to bring you the information and insight our readers demand.
We humbly seek to provide the tools and information necessary for our readers to decide for themselves what is true and what is right.
TOP TAGS
TOP CATEGORIES
FEATURES
American Liberty News ©2022
Evolution Digital Media | 1900 Reston Metro Plz | Suite 600 | Reston, VA 20190